Kayak Accessories
- Out of stock
The MPG907 Axis™ Truck Bed Extender is made of heavy duty steel with a thick powder coat to resist corrosion. It can be used in either the vertical position to create a "rear of vehicle" load bar, or, the horizontal position to extend the bed of the truck. The Axis™ is compatible with 2" receivers and has multiple settings to adjust both height and width. Each unit comes with hitch pin & retainer. Also includes an Anti-Wobble Bracket that stabilizes the Extender and reduces rattle and vibration during transport. Workmanship and material guaranteed with our Lifetime Limited Warranty. 
The MPG125 FoldAway-5™ can carry a single recreational or touring kayak on it's side, vertically stack two kayaks, carry a canoe or large sit-on-top kayak, and transport any size SUP. Featuring a pair of quick-release fold-down frames with removable 2-boat modules for transporting wide loads. Each set of carriers are built with corrosion resistant coated steel, thick over-sized padding and heavy duty molded parts. The universal mounting system fits a large cross section of aftermarket load bars (round, square and oval) as well as most factory systems. Also includes two lengths of mounting bolts to achieve the best rack installation. Comes with cam style load straps, bow & stern safety tie-downs and SUP foam pads. Product workmanship and material performance is guaranteed with our Lifetime Limited Warranty.
The MPG132 FoldAway-J™ is exclusively designed to safely carry a single recreational or touring kayak on its side. These carriers feature quick-release fold-down frames for low clearance & improved gas mileage when not in use. Built with corrosion resistant coated steel, over-sized padding, heavy duty molded parts and a unique mounting design. This universal mounting system fits a large cross section of aftermarket load bars (round, square and oval) as well as most factory systems. The dual mount locations ensure the carriers are firmly in place and eliminate side to side movement. Also includes two lengths of mounting bolts to achieve the best rack installation. Comes with cam style load straps and safety tie-downs. Product workmanship and material performance is guaranteed with our Lifetime Limited Warranty.
The J-Pro2 is our upgraded J-Cradle carrier with enhanced foam padding and acrylic sleeves to better protect the kayak. Fits most sit-inside and sit-on-top kayaks. This mid-priced carrier features a silver finish with multiple layers of corrosion resistant coating and universal fit hardware. Includes Lifetime Limited Warranty.
Protect your investment with The LockUp cable lock. This system has state-of-the-art technology with anti-drill, anti-saw and anti-pick features. Heavy duty 10mm thick multi-coaxial cables prevent opportunistic theft. Good for multiple bikes or larger equipment. Note: Cable locks prevent opportunistic theft. This security cable system is not intended to be anti-theft.- 10' locking cable secures a multiple bikes from opportunistic theft
- Heavy duty 10mm stranded steel cable is difficult to cut
- Corrosion resistant vinyl sheathing provides a long life
- Anti-pick and anti-saw theft prevention design components
- Looped cable end enables simple and quick locking points
- Dimensions: 10mm x 10' long cable
- Weight: 5 lb
- Includes 2 Keys
- Includes 1 10mm 10' LockUp cable
- Out of stock
Shipping Not Available On This Item - Store Pickup Only!
The MicroSport™ LowBed™ offers a low load bar support system, which lowers the bar height to 22 inches. The ease of loading and unloading heavy kayaks and gear is simple and safe with the LowBed™. Additionally our galvanized marine grade trailers can be backed down a boat ramp to launch directly into the water. Featuring submersible LED lighting and 78” load bars for up to six kayaks. This 800 lb. load rated trailer is DOT and Transport Canada approved. Assembles in approximately three to four hours with standard tools. Five Year Warranty. Made in the USA. 
The MPG308 T-Style Hood Loops are designed to work under the hood, or with the deepest rear hatches. Eliminates the need for finding vehicle frame tie-down points. Polyester webbing with injection molded T-body construction.
The SeaWing™ is our signature design that is easy to install and works with most recreational and sea kayaks. There is no requirement to lift the entire kayak at any time. Simply position the front of the kayak on the rear of the vehicle; move to the rear of the kayak and push it up to load. To better protect the vehicle and help with loading and unloading your kayak our optional Channel Loader™ Kayak Load Assist, Telos™ XL Load Assist or Stinger™ Load Assist Module can be purchased separately. Saddles are constructed with non-corrosive poly-carbon and nylon to insure a rust free and long life. Features include universal fit mounting hardware and Lifetime Limited Warranty.
The VersaRail™ instantly transforms a bare roof into a functional and stable platform. Transport bikes, boats & storage systems, as well as, oversized loads from the hardware store. Available in 50" and 58" lengths, these load bars come assembled and ready to install. Includes twin cup vacuum towers, 1.5" attachment straps and a Five Year Limited Warranty. For temporary use only. Remove when not in use.
The VersaRail™ instantly transforms a bare roof into a functional and stable platform. Transport bikes, boats & storage systems, as well as, oversized loads from the hardware store. Available in 50" and 58" lengths, these load bars come assembled and ready to install. Includes twin cup vacuum towers, 1.5" attachment straps and a Five Year Limited Warranty.
Features:
- Low pressure balloon beach wheels
- Works great in soft sandy terrain
- Push button wheel release - No more clips to lose
- Adjustable scupper width and height
- Corrosion free and UV resistant construction
- Lifetime Limited Warranty
Specifications:
- Load Capacity: 250 lb (113 kg)
- Weight: 12 lb (5.4 kg)
- Dimensions: 36" x 6" x 31" high
- 12" x 7" low pressure balloon wheels
- Upright diameter with foam – 1”
- Upright diameter without foam – 0.75”
- Fits scupper hole distances (center to center) – 3.25” to 16”
- Frame: Marine Grade Anodized Aluminum
The YakSwing™ Folding Kayak Wall Storage System is a medium capacity wall storage system that conveniently folds back against the wall when not in use. Safely holds sit-inside, and sit-on-top kayaks. Includes a welded cable ring that allows a cable lock to be installed for theft prevention. Includes mounting hardware and Lifetime Limited Warranty.
- Cord kit for recessed pad eye installation included
- Non-corrosive zippered access
- Gusseted seam for expandable storage capacity
- Out of stock
Economical, general use cordage great for camping, fishing, hunting or boating! 
FEATURES:- Medium-weight coated nylon packcloth
- Tether hook
- Adjustable bungee cord rim attachment
- Double-stitched seams
- Stock Cockpit Sizes: 4.2 thru 7.0
- Out of stock
NYLON COCKPIT COVER
FEATURES:- Medium-weight coated nylon packcloth
- Tether hook
- Adjustable bungee cord rim attachment
- Double-stitched seams
Scupper Stoppers can be used to plug the scupper holes in the cockpit of your Old Town or Ocean Kayak. This will help you stay dry while you are paddling. Sold in pairs. PLEASE NOTE: Scupper Stoppers are completely round in shape and will not fit oval-shaped scupper holes. Comes in four sizes: Extra Small, Small, Medium & Large.
