Canoe Accessories
Waterproof material is sonically welded and seam sealed to repel weather, mud and water for ultimate phone protection.- Out of stock
Shipping Not Available On This Item - Store Pickup Only!
The MicroSport™ LowBed™ offers a low load bar support system, which lowers the bar height to 22 inches. The ease of loading and unloading heavy kayaks and gear is simple and safe with the LowBed™. Additionally our galvanized marine grade trailers can be backed down a boat ramp to launch directly into the water. Featuring submersible LED lighting and 78” load bars for up to six kayaks. This 800 lb. load rated trailer is DOT and Transport Canada approved. Assembles in approximately three to four hours with standard tools. Five Year Warranty. Made in the USA. 
Protect your investment with The LockUp cable lock. This system has state-of-the-art technology with anti-drill, anti-saw and anti-pick features. Heavy duty 10mm thick multi-coaxial cables prevent opportunistic theft. Good for multiple bikes or larger equipment. Note: Cable locks prevent opportunistic theft. This security cable system is not intended to be anti-theft.- 10' locking cable secures a multiple bikes from opportunistic theft
- Heavy duty 10mm stranded steel cable is difficult to cut
- Corrosion resistant vinyl sheathing provides a long life
- Anti-pick and anti-saw theft prevention design components
- Looped cable end enables simple and quick locking points
- Dimensions: 10mm x 10' long cable
- Weight: 5 lb
- Includes 2 Keys
- Includes 1 10mm 10' LockUp cable
- Out of stock
In typical YakAttack fashion, what started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The DoubleHeader track mount can serve several different purposes, but in this case, it is the foundation for the perfect offset paddle holder solution that our customers have been dreaming of ever since the launch of the RotoGrip several years back. Compatible with standard diameter kayak paddles the RotoGrip Paddle Holder has become the most widely used paddle holder in the industry. The RotoGrip is a simple yet highly effective paddle holder solution, but many paddlers wanted to use one or two RotoGrips on a single side of the kayak. When using two RotoGrips on a single piece of track, you get a nice tight hold, but you also cover up the entire length of the track with your paddle, rendering open track space useless. The DoubleHeader in this configuration eliminates that problem entirely and offsets the paddle holders off the kayak allowing for the full functionality of the remaining track space for other accessories. If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track. - Out of stock
The Deluxe Anchor Trolley will help you stop being a victim of changing winds and currents while fishing in the anchored position. The YakGear Deluxe Anchor Trolley Kit allows deployment of any anchor, drift chute, or stakeout pole before judging the current and wind while still remaining in a favorable fishing position. Without a trolley you are limited to anchoring to where you can reach, causing your boat to swing back and forth. Mounted just off one gunwale of any kayak or canoe, the deluxe trolley kit uses a nylon pulley system to select a desirable position anywhere from bow to stern, then maintains the positioning through the use of a 2-5/16 inch mini zigzag cleat. The deluxe system uses Harken pulleys to seamlessly pass trolley rope from bow to stern, without the standard rubbing of rope along slightly less smooth pad eyes. The mounted pulleys are raised off the boat enough to eliminate any unnecessary rubbing or scratching of the boat. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone and anchor recommended, but not included. - Out of stock
An alternative to the original YakStick Mud Anchor, the lightweight YakGear – YakStick Floating Stake-Out Stick provides effortless and silent anchoring in shallow waters. Available in 6ft, Stake-Out sticks are a preferred anchoring method in shallow coastal waters as well as in shallow lakes and streams. The new multi-purpose handle design allows for a firm grip when pushing through a variety of hard bottoms and can be flipped around to be used as a push pole mud foot or push off. The YakStick shaft is made of 7/8″ vertical and horizontal pultrusion-formed fiberglass, giving it unsurpassed strength. Its handle and point are made of rigid nylon and best of all, it floats! - Out of stock
The AirFlow2™ roof rack lets you carry gear and accessories on the roof of your vehicle with raised, factory side rails. This complete roof rack system includes two double walled aluminum cross bars and four towers. The aerodynamically designed bar shape helps creates a quiet roof rack system for improved driving enjoyment. The full-length crossbars extend past the towers to provide additional mounting space for carriers. For security, the towers have built-in key actuated locks to protect the racks from opportunity theft. Each rack firmly clamps onto the vehicle's raised side rails using the hex wrench provided. Product workmanship and material performance is ensured with a Lifetime Limited Warranty. Optional Malone T-slot installation hardware sold separately.
